 |
Fully Qualified Solution |
|
Long-Range Color/BW Imager |
|
Low Light Operation to .07 lux |
|
22x Parfocal Optical Zoom |
|
Wide Dynamic Range - Dawn to Dusk |
|
Image Enhancing Spectral Filters |
|
Waterproof, Dustproof to IP-67 |
|
EMI/RFI Compatible |
|
Ice and Condensation Free to -40°C |
MIL-Qualified Protection
Visible imaging has never been this rugged or feature
packed. The V-26 Strong View is built to take whatever nature can dish
out. Operation from ~400 to +55°C is standard. Shock to 2OGs, wind to
100 knots. EMI/RFI compatibility per relevant sections of MIL-STD461,
Part 5. Waterproof to im and pressurized.
Image Enhancement
Filters
In Black
& White mode, a series of 4 selectable filters provide enhanced viewing
in smoke, dust, sky or vegetation by filtering out spectral content that
detracts from target viewing. Sharp color daylight imagery is obtained
by filtering out IR content. When low light conditions warrant, the IR
can be passed to the detector array for high sensitivity B&W viewing.
Broad Dynamic Range
Operation from .07 lux
(dusk) to 100,000 lux is standard. The iris operates from f/7 to
f/3000 automatically with manual override to provide the maximum
possible dynamic range. Gain and level control is automatic or may be
programmed to optimize imagery under any condition.
Reliability & Maintenance
Designed for MTBF to 17,000 hours, the V-26 StrongView is
built to be trouble-free and easy to maintain. Externally replacable
fuses have the same value. Camera iced over? Built in heaters melt up to
1/2 inch of ice even at -40°. The pressurized housing is rated for 2
years between re-purging. Camera pressure is easily read through a sight
glass in at the rear bulkhead even when the power is off. The camera
also features a software low pressure warning indicator.
Long Range Imaging
The V-26 features 22x optical zoom that is fully
programmable for zoom position. Once focused at infinity under maximum
zoom conditions, focus is “par-focal”, or stays in focus over the full
zoom range.
Cl Camera Software
Suite
Critical
Imaging offers advanced control GUI software to control all camera
systems. Focus and zoom and filter wheel position are readily modified,
status codes interpreted and heaters/deicers operated. The camera’s
control interface can be customized to emulate most existing control
protocols for ready integration into higher level systems.
